雅安科技有限公司-HDMI連接器、MICRO USB CONNECTOR (08-15 11:09) MICRO USB連接器 末 >> 共有 6 條記錄 轉到 頁 回首頁 ∣ 最新消息 ∣ 關於我們 ∣ 服務項目 ∣ 服務流程 ∣ 貼心盯嚀 ∣ 聯絡我們 switch、switches、HDMI CONNECTOR、HDMI連接器、MICRO USB CONNECTOR、MICRO USB連接器
USB - Wikipedia, the free encyclopedia The USB 2.0 specification was released in April 2000 and was ratified by the USB Implementers Forum (USB-IF) at the end of 2001. Hewlett-Packard, Intel, Lucent Technologies (now Alcatel-Lucent), NEC and Philips jointly ...
mini/micro USB Connector, Wellco /Professional manufacturer for cable & connector. Competitive price. Specialize in mini HDMI/DVI/RJ/SATA/USB cable,RF/D-Sub/Consumer/Computer/Printer/VGA/RGB/Power/Multi media/Displayport/firewire IEEE 1394/Networking & Lan cable,CAT5E/6E,Speaker/Microphone/Coaxial/TV/S-Video/composite Video ...
MainSuper Enterprises Co., LTD. Micro USB Plug Micro USB-A / Plug / With Clamp / For Cable Ass'y (II) Micro USB-B / Plug / For Cable Ass'y (I) Micro USB-B / Plug / With Clamp / For Cable Ass'y (II) Micro USB-B / Plug / For Cable Ass'y (III) ...
micro usb connector - 購物搜尋結果
健和興端子股份有限公司 K. S. TERMINALS INC. - 電工端子,不絕緣紅銅端子,絕緣紅銅端子,絕緣快速連接器,德規端子 ... MICRO USB CONNECTOR SERIES MICRO USB B TYPE RECEPTACLE RIGHT ANGLE SMT TYPE SHELL SMT WITHOUT POST MICRO USB B TYPE RECEPTACLE RIGHT ANGLE SMT TYPE SHELL SMT WITH POST MICRO USB B TYPE ...
Micro Usb Connector - 相關圖片搜尋結果
MICRO USB CONNECTOR - 雅安科技有限公司-switch、switches、HDMI CONNECTOR MICRO USB CONNECTOR 連接器基本介紹 接頭設計的相當耐用。許多以往使用的接頭較脆弱，即使受力不大，有時針腳或零件也會折彎甚至斷裂。而 USB 接頭的金屬導電部份周圍有塑料作為保護，而且整個連接部份被金屬的保護套圍住，因此 USB 接頭不論插 ...
Taiwan Micro USB Connector from Hsih Chih Dist., Manufacturer: Attend Technology Inc. Micro USB Connector 202, 207, 205 Series from Taiwan is supplied by Manufacturer, Exporter, Distributor, Consultant: Attend Technology Inc. on Global Sources ... 202A-FBNR-R03: mini USB connector, 5-pin B type 202B-FBT0-R01: mini USB connector, 5-pin ...
Micro-USB連接器掉落及焊錫破裂 | 電子製造，工作狂人(ResearchMFG) 在【電子製造業】打滾多年，分享 SMT、焊錫、塑膠射出、產品設計、瓦楞包裝…等經驗。 ... Allen; 我看了幾家的 micro USB connector 的焊腳好像都是在 body 的後面，要想避免因為槓桿原理造成的剝落，應該要加強連接器的固定力道才是。
